Flex Reline with Chimney Removed (6 inch)
The Chimney Pack is used when your chimney stack has been lowered beneath your roof line, and you are required to re-line the remaining chimney stack with a flexible liner. This happens when your existing masonry chimney becomes unsafe. This Chimney Pack allows you to build the chimney off the top of the existing stack, and through the roof. All the parts you require are included in the Chimney Pack, but the correct length of flue liner must be ordered seperately.
CONTENTS
The pack contains:-
1 x Stove Pipe
1 x MAE Stove Pipe To Flex Adaptor
1 x Register Plate
1 x DT - Adaptor To Single Wall
1 x DT - Wall Support Plate
2 x DT - Pipe 1000mm
1 x DT - Pipe 500mm
1 x DT - Roof Support
1 x RES 2 EPDM Flashing
1 x DT - Storm Collar
5 x DT - Locking Band
1 x High Temperature Sealant
1 x DT - Terminal
The pack contains:-
1 x Stove Pipe
1 x MAE Stove Pipe To Flex Adaptor
1 x Register Plate
1 x DT - Adaptor To Single Wall
1 x DT - Wall Support Plate
2 x DT - Pipe 1000mm
1 x DT - Pipe 500mm
1 x DT - Roof Support
1 x RES 2 EPDM Flashing
1 x DT - Storm Collar
5 x DT - Locking Band
1 x High Temperature Sealant
1 x DT - Terminal
APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg/m³. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg/m³. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.
){kind=link}