Pot Hanging Cowls
USES
The Pot Hanging Cowls has two main functions :-
(1) Allows the chimney liner to be installed without removing the pot
(2) The straps on the outside provide a clamping system to the chimney pot.
Pot Hangers with integral cowls also provide rain protection or even prevent anti downdraught problems at the top of the stack.
INSTALLATION
To attach the flue liner to the Pot Hanger, release the inner jubille clip and push the 3 straps away from the centre mandrel. Insert the mandrel into the flue liner and push the flue liner up fully until it won't move anymore. Now tighten the jubille clip.
Install the flue liner as per normal fitting instructions.
Once the liner is in position release the outer jubille clip, now let the Hanger drape over the chimney pot. Now tighte the jubille clip so it is securely held against the chimney pot.
AVAILABILITY
POT HANGER (20-D-PHS)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH (20-D-PHCM)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH TERRACOTTA (20-D-PHCMT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL (20-D-PHAD)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL TERRACOTTA (20-D-PHADT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
The Pot Hanging Cowls has two main functions :-
(1) Allows the chimney liner to be installed without removing the pot
(2) The straps on the outside provide a clamping system to the chimney pot.
Pot Hangers with integral cowls also provide rain protection or even prevent anti downdraught problems at the top of the stack.
INSTALLATION
To attach the flue liner to the Pot Hanger, release the inner jubille clip and push the 3 straps away from the centre mandrel. Insert the mandrel into the flue liner and push the flue liner up fully until it won't move anymore. Now tighten the jubille clip.
Install the flue liner as per normal fitting instructions.
Once the liner is in position release the outer jubille clip, now let the Hanger drape over the chimney pot. Now tighte the jubille clip so it is securely held against the chimney pot.
AVAILABILITY
POT HANGER (20-D-PHS)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH (20-D-PHCM)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH TERRACOTTA (20-D-PHCMT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL (20-D-PHAD)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL TERRACOTTA (20-D-PHADT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
