A metal connector which connects the flexible chimney liner to single wall pipe at the base of the stack.
Wednesday, 7 December 2011
The Installation Pack No (608) - (150mm / 6")
Installation Pack No. 8, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a terracotta pot hanging cowl with mesh, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The Installation Pack No (607) - (150mm / 6")
Installation Pack No. 7, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a terracota pot hanging cowl with mesh, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The Installation Pack No (606) - (150mm / 6")
Installation Pack No. 6, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a pot hanging cowl with mesh, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The Installation Pack No (605) - (150mm / 6")
Installation Pack No. 5, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner, rain cap and chimney notice plate.
The Installation Pack No (604) - (150mm / 6")
Installation Pack No. 4, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 125mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The Installation Pack No (603) - (150mm / 6")
Installation Pack No. 3, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a pot hanging cowl with mesh, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The Installation Pack No (602) - (150mm / 6")
Installation Pack No. 2, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner, rain cap and chimney notice plate.
The Installation Pack No (601) - (150mm / 6")
Installation Pack No. 1, ALL YOU NEED IN ONE BOX FOR USE WITH 150mm diameter multifuel flex - The box contains a top plate, top clamp, top insert, nose cone, adapter from 150mm vitreous enamel or stainless steel single wall to 150mm multi-fuel liner and chimney notice plate.
The 150mm (6") QUATTRO Flue Liner (904L/904L) - 100m boat
Full drum (100m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
The 150mm (6") QUATTRO Flue Liner (316L Grade) - 100m boat
Full drum (100m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
The 150mm (6") QUATTRO Flue Liner (904L/904L) - 40m drum
Full drum (40m) of Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product.
The 150mm (6")QUATTRO Flue Liner (316L Grade) - 40m drum
Full drum (40m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
The 150mm (6") QUATTRO Flue Liner (904L/904L Grade)
This multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product
The 150mm (6 ") QUATTRO Flue Liner (316L/316L Grade)
Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
Friday, 25 November 2011
Register Plate (D) 1250mm x 600mm
Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site.
Register Plate (C) 1250mm x 600mm
Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site.
Register Plate (B) 1000mm x 400mm
Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site.
Register Plate (A) 800mm x 400mm
Register Plate made from 1.5mm thick galvanised steel, it can be sprayed to match the colour of your stove pipe. Comes 4 angle supports. Can be cut down on site.
Chimney Notice Plate
The Chimney Notice Plate :
Chimney Notice plates are a Building Regulations requirement. They most be filled out and fixed near to the appliance or within a meter cupboard.
Aluminium Tape
50mm(2 inch) wide, 50 metres long aluminium tape with a temperature range from -10 degrees centigrade to 100 degrees centigrade.
The Rockwool Insulation Tubes 125mm
Manufactured from non-combustible rock wool. It does not sustain vermin and will not encourage growth of fungi, mould or bacteria and is suitable for continuous operating temperatures of up to 500 degrees centigrade. You must use the foil tape for all joints. Pipe thickness is 25mm (1 inch) and lengths are 1000mm (39 inches). Comes in three diameters for the following liner sizes 140mm (to suit 125mm ( 5 inch )), 169mm ( to suit 150mm ( 6 inch )) and 219mm ( to suit 200mm ( 8 inch )). The 219mm diameter can easily be trimmed to fit 175mm (7 inch) chimney liner. (Not suitable for class 2 flexible liner).
The Vermiculite (100L Bag)
The Vermiculite (100L Bag) :
For insulating solid fuel and wood burning liners, it reduces the amount of condensates by keeping the flue warm, it also holds the liner rigid to aid sweeping.
Joiner 125mm (5 inch)
The Joiner 125mm (5 inch) :
Allows the joining of two pieces of multi fuel liner (only to be used in none flueing applications).
The Gather Hood 300mm x 300mm Base
Gather hoods are used on open fires and baskets. The formed stainless steel gather is connected to the multi fuel liner in the chimney. The gather helps the flow of gases up the chimney, it also prevents the liner coming into contact with a fierce heat that can be produced.
The Nose Cone 125mm (5 inch)
The Nose Cone 125mm (5 inch) :
The nose cone is attached to the leading end of the liner, it helps prevent snagging against the side of the stack during installation. Please note that draw cords are not supplied.
Wednesday, 19 October 2011
125mm (5 inch) - Flue Adapter 125 Rigid to 125 Flex
A metal connector which connects the flexible chimney liner to single wall pipe at the base of the stack.
125mm (5 inch) - Installation Pack No (508)
Installation Pack No. 8, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex
The box contains a terracotta pot hanging cowl with mesh, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a terracotta pot hanging cowl with mesh, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - Installation Pack No (507)
Installation Pack No. 7, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a terracota pot hanging cowl with mesh, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a terracota pot hanging cowl with mesh, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - Installation Pack No (506)
Installation Pack No. 6, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a stainless steel pot hanging cowl with mesh, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a stainless steel pot hanging cowl with mesh, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - Installation Pack No (505)
Installation Pack No. 5, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner, rain cap and chimney notice plate.
The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner, rain cap and chimney notice plate.
125mm (5 inch) - Installation Pack No (504)
Installation Pack No. 4, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a top plate, top clamp, top insert, nose cone, increasing adapter from 100mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - Installation Pack No (503)
Installation Pack No. 3, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a stainless steel pot hanging cowl with mesh, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a stainless steel pot hanging cowl with mesh, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - Installation Pack No (502)
Installation Pack No. 2, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a top plate, top clamp, top insert, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner, rain cap and chimney notice plate.
The box contains a top plate, top clamp, top insert, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner, rain cap and chimney notice plate.
125mm (5 inch) - Installation Pack No (501)
Installation Pack No. 1, ALL YOU NEED IN ONE BOX FOR USE WITH 125mm diameter multifuel flex.
The box contains a top plate, top clamp, top insert, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
The box contains a top plate, top clamp, top insert, nose cone, adapter from 125mm vitreous enamel or stainless steel single wall to 125mm multi-fuel liner and chimney notice plate.
125mm (5 inch) - HD-FLEX Flue Liner (316L Grade) - 40m drum
Full drum (40m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
125mm (5 inch) - QUATTRO Flue Liner (904L/904L) - 100m boat
Full drum (100m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product.
125mm (5 inch) - QUATTRO Flue Liner (316L Grade) - 100m boat
Full drum (100m) of Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product
125mm (5 inch) - QUATTRO Flue Liner (904L/904L) - 44m drum
Full drum (44m) of Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product.
125mm (5 inch) - QUATTRO Flue Liner (316L/904L) - 44m drum
Full drum (44m) of Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product .
Thursday, 3 March 2011
Install Packs - Installation Packs contain everything you need to install a flue liner to HETAS recommendations
Installation Packs can include Top Plate, Top Clamp, Protection Sleeve, Nose Cone, Chimney Notice Plate, Adapter to single wall pipe, Rain Cap, Pot Hanging Cowl with Mesh (stainless steel finish), Protection Sleeve, Increasing adapter to single wall pipe.
Comes in diameters: 125mm, 150mm, 180mm and 200mm.
Comes in diameters: 125mm, 150mm, 180mm and 200mm.
Ancillaries - Rain Cap, Pot Hanging Cowls, Protection Sleeve Rain Cap, Top Plate, Top Clamp, Protection Sleeve, etc
Pot Hanging Cowls
USES
The Pot Hanging Cowls has two main functions :-
(1) Allows the chimney liner to be installed without removing the pot
(2) The straps on the outside provide a clamping system to the chimney pot.
Pot Hangers with integral cowls also provide rain protection or even prevent anti downdraught problems at the top of the stack.
INSTALLATION
To attach the flue liner to the Pot Hanger, release the inner jubille clip and push the 3 straps away from the centre mandrel. Insert the mandrel into the flue liner and push the flue liner up fully until it won't move anymore. Now tighten the jubille clip.
Install the flue liner as per normal fitting instructions.
Once the liner is in position release the outer jubille clip, now let the Hanger drape over the chimney pot. Now tighte the jubille clip so it is securely held against the chimney pot.
AVAILABILITY
POT HANGER (20-D-PHS)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH (20-D-PHCM)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH TERRACOTTA (20-D-PHCMT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL (20-D-PHAD)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL TERRACOTTA (20-D-PHADT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
The Pot Hanging Cowls has two main functions :-
(1) Allows the chimney liner to be installed without removing the pot
(2) The straps on the outside provide a clamping system to the chimney pot.
Pot Hangers with integral cowls also provide rain protection or even prevent anti downdraught problems at the top of the stack.
INSTALLATION
To attach the flue liner to the Pot Hanger, release the inner jubille clip and push the 3 straps away from the centre mandrel. Insert the mandrel into the flue liner and push the flue liner up fully until it won't move anymore. Now tighten the jubille clip.
Install the flue liner as per normal fitting instructions.
Once the liner is in position release the outer jubille clip, now let the Hanger drape over the chimney pot. Now tighte the jubille clip so it is securely held against the chimney pot.
AVAILABILITY
POT HANGER (20-D-PHS)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH (20-D-PHCM)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGING COWL WITH MESH TERRACOTTA (20-D-PHCMT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL (20-D-PHAD)
Only available in raw stainless steel finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
POT HANGER with ANTI-DOWN DRAUGHT COWL TERRACOTTA (20-D-PHADT)
Available in stainless steel with terracotta powder coated finish.
Comes in the following flue liner diameters 125mm, 150mm, 180mm and 200mm
Triplelock Gas and Oil Introduction, Installation, Application, Approvals, Designation, Packaging, etc.
Triplelock Gas and Oil Introduction, Installation, Application, Approvals, Designation, Packaging, etc.
TRIPLELOCK flexible flue liner is designed for use with gas and 28-second oil fired appliances, and to accomodate temperatures not exceeding 260 degrees.
Manufactured in a single skin of 316L stainless steel. It has a rolled and crimped seam featuring a triple locking process.
Comes with a range of accessories, and is available in 100mm, 125mm, 150mm, 180mm, 200mm, 250mm, 300mm, 350mm and 400mm diameters.
TRIPLELOCK flexible flue liner is designed for use with gas and 28-second oil fired appliances, and to accomodate temperatures not exceeding 260 degrees.
Manufactured in a single skin of 316L stainless steel. It has a rolled and crimped seam featuring a triple locking process.
Comes with a range of accessories, and is available in 100mm, 125mm, 150mm, 180mm, 200mm, 250mm, 300mm, 350mm and 400mm diameters.
HD Flex Introduction, Application, Approvals, Designation, Installation & Prep, etc
As the name suggests the flue liner is manufactured from two strips of raw material, the wider of the two forms the convoluted outer, whilst the inner froms the smooth inner wall. The joint or seam is constructed using a complex folded seam which uses more material than other systems, this then makes the joint extremely strong.
The system has been designed to upgrade existing chimneys which have failed, or for used to increase the performance of the flue.
Manufactured in two skins of either 316L grade
or two skins of 904L grade
or inner skin of 904L and outer skin of 316L
Comes with a range of accessories, and is available in 125mm, 150mm, 180mm and 200mm diameters.
Quattro DS Installation & Prep, Introduction, Application, Approvals, Designation, etc
Quattro-DS (double strip) is a flexible twin-skinned stainless steel flue lining with a smooth inner wall, and a riged convoluted outer wall (to aid bending).
As the name suggests the flue liner is manufactured from two strips of raw material, the wider of the two forms the convoluted outer, whilst the inner froms the smooth inner wall. The joint or seam is construtructed using a triplelock dovetail folded seam, to make this joint extremely strong.
The system has been designed to upgrade existing chimneys which have failed, or for used to increase the performance of the flue.
Manufactured in two skins of either 316L grade (System MF5),
or two skins of 904L grade (System MF18H),
or inner skin of 904L and outer skin of 316L (System MF18M)
Comes with a range of accessories, and is available in 100mm, 125mm, 150mm, 180mm, 200mm, 250mm, 300mm, 350mm and 400mm diameters.
As the name suggests the flue liner is manufactured from two strips of raw material, the wider of the two forms the convoluted outer, whilst the inner froms the smooth inner wall. The joint or seam is construtructed using a triplelock dovetail folded seam, to make this joint extremely strong.
The system has been designed to upgrade existing chimneys which have failed, or for used to increase the performance of the flue.
Manufactured in two skins of either 316L grade (System MF5),
or two skins of 904L grade (System MF18H),
or inner skin of 904L and outer skin of 316L (System MF18M)
Comes with a range of accessories, and is available in 100mm, 125mm, 150mm, 180mm, 200mm, 250mm, 300mm, 350mm and 400mm diameters.
Quattro SS Introduction, Application, Approvals, Designation, Packaging.
Quattro SS Introduction, Application, Approvals, Designation, Packaging.
Quattro-SS (single strip) is a flexible twin-skinned stainless steel flue lining with a smooth inner wall and a convoluted riged outer wall (to aid bending).
As the name suggests the flue liner is made from strip of raw material, which is bent in half to form a smooth inner wall, and a convoluted outer wall. Being formed from one peice of steel means the joint or seam (which is the weakest point) is extremely strong.
The system has been designed to upgrade existing chimneys which have failed, or for used to increase the performance of the flue.
Manufactured in two skins of either 316L grade (System MF35) or 904L grade (System MF36)
Comes with a range of accessories, and is available in 80mm, 100mm, 125mm, 150mm, 180mm, 200mm, 250mm and 300mm diameters.
Quattro-SS (single strip) is a flexible twin-skinned stainless steel flue lining with a smooth inner wall and a convoluted riged outer wall (to aid bending).
As the name suggests the flue liner is made from strip of raw material, which is bent in half to form a smooth inner wall, and a convoluted outer wall. Being formed from one peice of steel means the joint or seam (which is the weakest point) is extremely strong.
The system has been designed to upgrade existing chimneys which have failed, or for used to increase the performance of the flue.
Manufactured in two skins of either 316L grade (System MF35) or 904L grade (System MF36)
Comes with a range of accessories, and is available in 80mm, 100mm, 125mm, 150mm, 180mm, 200mm, 250mm and 300mm diameters.
Flue Liner Regulations, Warranties, 316L & 904L & MIX, Size Of Lining.
316L/316L Grade:- (System MF35)
This liner uses 316L grade stainless steel for both the inner and the outer skins. It is suitable for use on appliances burning the following fuels:-
GAS, COAL, OIL, COKE, WOOD and CURED DRY PEAT
904L/316L Grade:- (System MF18M)
This liner uses 904L grade stainless steel for the inner and 316L grade stainless steel for the outer skin. It is suitable for use on appliances burning the following fuels:-
GAS, COAL, OIL, COKE, WOOD, CURED DRY PEAT and SMOKELESS FUELS.
This is the most economical liner for use with smokeless fuels.
904L/904L Grade:- (System MF36)
This liner uses 904L grade stainless steel for both the inner and the outer skins, the best chimney liner you can buy. It is suitable for use on appliances burning the following fuels:-
GAS, COAL, OIL, COKE, WOOD, CURED DRY PEAT and SMOKELESS FUELS.
Recommended particularly if you are slumbering your appliance overnight, or for heavy usage.
Chimney liners can be used on open fires as well as closed appliances like wood burning and multi fuel stoves.
Subscribe to:
Posts (Atom)