Chimney System Packs 5 inch premium - Bungalow External



The Chimney Pack is used when you are running the flue outside your Bungalow. All the parts you require are included in the Chimney Pack.

CONTENTS
The pack contains:-
1 x Stove Pipe
1 x 45° Bend Stove Pipe
1 x DT - Adaptor To Stove Pipe
1 x DT - Pipe 500mm
1 x DT - Adjustable Length
1 x DT - 135° Tee
1 x DT - Tee Cap
1 x DT - Wall Support Bracket
1 x DT - Wall Support Plate
2 x DT - 45° Bend
1 x DT - Pipe 1000mm
2 x DT - Pipe 250mm
1 x DT - Terminal
10 x DT - Locking Bands
1 x DT - Wall Band
1 x Chimney Notice plate
1 x Carbon Monoxide Alarm
1 x High Temperature Sealant

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg per cubic metre. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.

APPROVALS
DT is HETAS Approved and is CE marked.

Designation Number is
EN1856-1 T600 N1 D V2 L50050 G50.

Chimney System Pack - 5 inch Chimney Removed or Lowered

The Chimney Pack is used when your chimney stack has been lowered beneath your roof line. This happens when your existing masonry chimney becomes unsafe. This Chimney Pack allows you to build the chimney off the top of the existing stack, and through the roof. All parts you require are included in the Chimney Pack.

 

CONTENTS
The pack contains:-
1 x DT - Wall Support Plate
2 x DT - Pipe 1000mm
1 x DT - Pipe 500mm
1 x DT - Roof Support
1 x RES 2 EPDM Flashing
1 x DT - Storm Collar
4 x DT - Locking Band
1 x High Temperature Sealant
1 x DT - Terminal

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg per cubic metre. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.

APPROVALS
DT is HETAS Approved and is CE marked.

Designation Number is
EN1856-1 T600 N1 D V2 L50050 G50.

Chimney System Packs 6 inch - Flex Reline with Chimney Removed

The Chimney Pack is used when your chimney stack has been lowered beneath your roof line, and you are required to re-line the remaining chimney stack with a flexible liner. This happens when your existing masonry chimney becomes unsafe. This Chimney Pack allows you to build the chimney off the top of the existing stack, and through the roof. All the parts you require are included in the Chimney Pack, but the correct length of flue liner must be ordered seperately.

 

CONTENTS
The pack contains:-
1 x Stove Pipe
1 x MAE Stove Pipe To Flex Adaptor
1 x Register Plate
1 x DT - Adaptor To Single Wall
1 x DT - Wall Support Plate
2 x DT - Pipe 1000mm
1 x DT - Pipe 500mm
1 x DT - Roof Support
1 x RES 2 EPDM Flashing
1 x DT - Storm Collar
5 x DT - Locking Band
1 x High Temperature Sealant
1 x DT - Terminal

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg/m³. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.

APPROVALS
DT is HETAS Approved and is CE marked.

Designation Number is
EN1856-1 T600 N1 D V2 L50050 G50.

Log Store (self assembly) W 1200mm x D 560mm x H 1560mm

Log Store made from FSC Certified tanalised timber. Slotted sides to improve drying times.

 

FSC Certified Timber.
Hand made in wales.
Flat Packed.
Easy to assemble complete with instructions.
Tanalised weatherproof timber.
Slotted sides to improve drying times.
Sturdy construction.
Long life.
W x H x D (1200mm x 1560mm x 550mm)

1000mm Pipe



Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
1mm Stainless Steel Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.

Chimney System Pack - 6 inch Flex Reline with Chimney Removed

The Chimney Pack is used when your chimney stack has been lowered beneath your roof line, and you are required to re-line the remaining chimney stack with a flexible liner. This happens when your existing masonry chimney becomes unsafe. This Chimney Pack allows you to build the chimney off the top of the existing stack, and through the roof. All the parts you require are included in the Chimney Pack, but the correct length of flue liner must be ordered seperately.

Installation - Fire Cement - Black - 2Kg Tub

A black in colour adhesive cement, withstands heat up to 1200°C. 2Kg tub

45 Elbow Black enamel finish



45 degree elbow used to make a 45 degree change in direction from the vertical, you need to buy a gasket seperately